Denest Chainsaw 20” 52cc 2-Cycle Gas Powered Chainsaw, High Performance and Safety Features

<p>How to Assemble the Chainsaw</p> <p>Install the jam teeth in the right direction.<br>Install the guide bar.<br>Install the chain.<br>Cover the side cover.<br>Adjust the chain tightness.<br>Tighten the screw.<br>&nbsp;</p> <p>Specification</p> <p>Color: Red, Black, Silver</p> <p>Material: PP, Mn Steel </p> <p>Style: Modern</p> <p>Assembly Required: Yes</p> <p>Engine Type: Single Cylinder, Air-cooled, 2-Stroke</p> <p>Ignition System: Self-reset Pull Start</p> <p>Fuel Tank Capacity: 550ml/18.6Oz</p> <p>Chain Fuel Tank Capacity: 260ml/8.8Oz</p> <p>Chain&nbsp;Pitch: 0.325#</p> <p>Bore: 45mm/1.77inch</p> <p>Power: 2.2kw</p> <p>Speed: 10500rpm</p> <p>Displacement: 52cc</p> <p>Oil Mixture: 25:1(Gasoline: Oil) &nbsp;</p> <p>Chain Length: 50.8cm/20inch</p> <p>Max. Cutting Diameter: About 48cm/18.9inch</p> <p>Product Size: 88*23*28cm/34.64*9.05*11.02inch</p> <p>Package Size: 56*27*34cm/22.04*10.6*13.38inch</p> <p>Gross Weight: 8.5kg/18.74 lbs</p> <p>&nbsp;</p> <p>Package&nbsp;Included</p> <p>1* Gas Chainsaw</p> <p>1* Chain</p> <p>1* Guide Bar</p> <p>1* Guide Bar Cover</p> <p>1* Fuel Mixing Bottle</p> <p>1* Oil Hopper</p> <p>1* Tool Bag</p> <p>1* English Manual</p> <p>Other Accessories for Assembly</p> <p>Details</p> <p>Heat Dissipation Holes:&nbsp;The heat-sink holes on the side of the product can dissipate heat in time&nbsp;and prolong the service life of this product.</p> <p>Tool Bag: You can put the equipped tools into the tool bag to avoid losing them while protecting the tools well to extend their service life. </p> <p>Guide Bar Cover: It allows for convenient storage of the guide bar when not in use and protects it well.</p> <p>Fuel Tanks: The 18.6Oz chainsaw fuel tank, 8.8Oz chain fuel tank, and equipped translucent fuel bottle allows for large capacity, a convenient mixture of fuels, and long-term use without frequent filling.</p> <p>Oil Hopper: The equipped oil hopper helps you add fuel to the machine easier without splashing.</p> <p>Notes</p> <p>Before starting the gasoline chainsaw, please ensure that it fits well with the guide bar, and use a wrench to adjust the chain. When installing the guide bar, please note that the screw column on the side cover must be aligned with the guide bar hole before installation(The function of the screw column is to adjust the chain tightness.). <br>Please use gasoline&nbsp;90# with special 2-cycle engine oil and never use pure gasoline. Gasoline&nbsp;and oil mixture ratio: 25:1.<br>Adjustment of oil output: the oil output can be controlled to turn larger to the left and smaller to the right. <br>Please note that after the first ignition sound, closing the choke and repeatedly pulling the start handle will suck in too much fuel and prevent the engine from starting. &nbsp;<br>If the choke knob is not fully pushed back after pulling the starter handle up to 6 times, the engine preheating may be missed. Too much fuel will flow out and submerge the spark plug. Then you can't start the chainsaw.<br>The damper is used to regulate air intake. When the engine is cold or not used for a long time, the damper needs to be pulled. If the engine is hot, it can be started directly. This is the same as the principle of starting a motorcycle! Close the damper, pull the start handle again 1-3 times to start it, and then you can use it normally.<br>Please pay attention to the tightness of the chain during installation (Pull the chain by hand. The distance between the chain and the guide plate is 3-5mm/0.12-0.2inch.), otherwise, it will affect the use effect.<br>After the chainsaw is started (The oil filler door must be empty.), it must wait for the chain to receive oil before starting to work(The oil pump will discharge oil and the ground will become wet.).<br>The carburetor must be cleaned after every 100H of operation before use. The air filter must be cleaned after 8H of operation. <br><br><br></p>

Denest Chainsaw 20” 52cc 2-Cycle Gas Powered Chainsaw, High Performance and Safety Features

• High-quality material made of durable PP housing and Mn steel guide bar and chain for strength and wear resistance
• 2-stroke engine with 52cc displacement and 10500rpm high speed for excellent cutting performance
• Double protection switches prevent accidental starting for enhanced safety during operation
• Muti-angle cutting capability allows for versatile use by changing the machine's direction
• Convenient hand-pull spring-loaded starter handle and cordless design for easy operation